Skip to content
Labugen

Concrete Mixer Truck Side View

A heavy-duty concrete mixer truck stands ready with its large revolving drum, front driver cab, and rear discharge chute.

Side view of a concrete mixer truck with a rotating drum and chute, full page.
Concrete Mixer Truck Side View
Print Download PNG

A4 format (landscape), black outlines on a white background · for home and classroom use

Advertisement

All coloring pages: Excavator and Construction Vehicle Coloring Pages

More from this category

Similar coloring pages: Excavator and Construction Vehicle Coloring Pages

Next step

What else can you print? Free, no account needed

Features of a Concrete Mixer Truck

The side view highlights a powerful construction vehicle equipped with a rounded mixing drum mounted at a tilted angle. Behind the front driver cab sits the mechanism that turns the drum, while a rear chute allows workers to direct liquid concrete exactly where it is needed on a job site.

Why the Mixer Drum Never Stops Turning

A concrete mixer truck must keep its drum rotating continuously throughout the journey from the batch plant to the job site. Constant rotation prevents the liquid mixture of cement, sand, gravel, and water from hardening inside the tank. Special spiral blades installed inside the drum push the concrete deep into the vessel while driving, then reverse direction to push it out down the chute upon arrival.

Real Colors of Concrete Mixer Trucks

  • Rotating mixing drum: white, green, blue, or striped patterns used by commercial ready-mix suppliers
  • Truck cab and hood: red, white, yellow, or dark blue matching company colors
  • Discharge chute: galvanized silver steel or dark gray coated metal
  • Wheels and tires: black rubber with silver or white wheel rims
Questions and answers

Questions and Answers About Concrete Mixers

What happens if a concrete mixer truck gets stuck in traffic for too long?
If concrete remains inside the drum for more than ninety minutes, it begins to set and harden. Drivers can add chemical retarders to delay setting, but severe delays require discharging the load before it damages the drum.
Why is the mixing drum placed at a tilted angle on the truck frame?
The incline allows gravity to keep the wet mixture near the bottom of the drum while turning. The angle also positions the discharge opening high enough so concrete can flow naturally down the rear chute into forms or pump hoppers.
How do workers clean the inside of the drum after delivering concrete?
Drivers flush the drum with fresh water immediately after unloading to prevent leftover concrete from hardening. The truck carries its own pressurized water tank specifically designed for rinsing the drum and chute before returning to the plant.
Advertisement